VESTAX VCI-300 + Serato Itch

Oh darf ich fragen welche inear du benutzt? Bin mit meinen jetzigen leider nicht zufrieden, obwohl ich vielleicht einfach mal ein wenig mehr mit denen hören sollte :S

Ich kann dir die Sennheiser CX-300 empfehlen. Hab die seit nem guten Jahr im Einsatz und bin sehr zufrieden. Es gibt einen baugleichen Creative, beim dem das Kabel aber symmetrisch ist, und mir gefällt die assymetrische Kabelführung des Sennheiser besser.
 
@ jolt: Ich hab dennen jetzt mal ne E-mail geschickt und die gefragt ob die mir das nach deutschland schicken können...mal sehen...

will mein ganzes Equipment in schönem Weiß haben :cool:
kennt noch jemand ne günstigere Variant?
 
die geschichte mit der libary, also dass die tagerei immer wieder zurückgesetzt wurde...warum auch immer, lässt sich eigentlich mit der "protect libary" beheben...theoretisch, doch wenn ich einen track getaggt habe in iT und ihn dann in itch in den player lade, dann stehen die tags wieder voll.
dann mache ich itch aus und wieder an...und die tags (durch protect libary sind wieder da)....

ich glaube, ich mach mir einfach die arbeit und passe die ganzen liesten von der ansicht her an und dann seh ich comments und album einfach nciht mehr...dann is es auch wurscht...
aber sagt doch mal...es muss doch irgendwo in itch verankert sein wie die standartansicht aussehen soll...kann man da (wo?..ka) nicht einfach n bissel was umschreiben...hmmmm?

übrigens...das zurücksetzten der tags nach dem laden, passiert nicht bei allen titeln...
 
Eine MP3-Datei kann mehrere Versionen der ID3 Tags haben. In iTunes konvertierst du den ID3 Tag zu z.B. Version 2.3 - diesen editierst du dann auch.

Nehmen wir mal an du löscht das Feld Album, wo vorher etwas drin stand. Wenn du diesen Track nun in ITCH importierst, dann kann es trotzdem sein, dass das Album angezeigt wird. Grund dafür ist, dass ITCH sofern das Feld leer ist bei anderen Versionen der ID3 Tags schaut ob dort etwas drin steht, und dann nimmt er den nächst aktuellsten und zeigt den an.

So habe ich mir das zusammengereimt, kommt bei mir aber genau hin und ich finde es auch logisch :D

€dit:

Davon abgesehen gibt es auch kaputte Tags. Man löscht irgendwas in iTunes, in ITCH ist es trotzdem da, da löscht man es wieder, guckt bei iTunes.. und schon taucht es dort auch wieder auf...
Das habe ich nur seeeehr sehr selten. Lösung dafür: einfach mal zu ID3v1.0 konvertieren und danach wieder zur Wunschversion, dann sollte es funktionieren. Jedoch könnten dabei viele Informationen verloren gehen, also entweder im Kopf merken oder vorher aufschreiben. z.B. wird der Interpret auf eine bestimmte Zeichenanzahl gekürzt, wenn du da irgendwas mit feat. noch drin stehen hast, dann wirds wohl zuviel und der Rest wird hinten abgeschnitten :S



Nochmal zu den Potikappen, kennt jemand irgend ne Seite die schöne (!) Kappen führen? :D Aus Gummi, von der Form ruhig ziemlich ähnlich nur irgendwie mit mehr Kontrast...
 
Zuletzt bearbeitet:
respekt meistrone!!! sehr geile idee...überaus schlüssig...

ok dann haben wir jetzt die ursache des schlamassels...und wie bzw. welches tool...ändert dann alle id3 versionen innerhalb eines trackz auf einen schlag, so wäre das problem gelöst ;-)
 
Für OS X habe ich nur ein Programm gefunden, allerdings auch kostenpflichtig. Ich schaue demnächst mal nach wie der Name dafür war. Ich selber mach den rest mit ITCH, ist zwar ein wenig Arbeit aber (bei mir) noch machbar ;)

Für Windows schätze ich mal, dass das Programm "mp3tag" sowas beherscht, ist wohl eines der besten.
 
Hi, ich habe mir seit ein paar Tagen vci-300 gekauft:). Ich kann in version 1.0.5 auto gain nicht finden. Gibt es diese Funktion da uberhaupt oder nicht? HELP ME
 
ich wrüde jetzt mal behaupten wollen, dass es diese funktion (noch) nicht gibt!...reicht doch wohl schon, dass das ding ne sync taste hat...
Darf man fragen, wofür diese funktion von nöten ist?...
 
mein ganze musik (kostenlos heruntergeladene) ist aus dem internet, bei manchen Liedern habe ich verschiedene Lautstärken. deshalb wäre es für mich bequemer, das auto gain zu haben, wie in Version 1.0.3 "use auto gain".
 
Kauf dir nen Paar Kopfhörer, dann brauchste kein Autogain.
Die Qualitäts- und Lautstärkenunterschiede gibt es auch bei anderen Medien.

Da brauchste kein billiges Autogain, nutz den Gain und Equalizer am Pult, dafür sindse da.
 
@funqmunk...Danke!...und nien, ich fange jetzt nicht wieder eine grundsatzdiskussion an, was es heißt ein Deejay zu sein...!

@arestos...für dein problem gibts genug freeware-tools im netz.
PS: einen kofhörer solltest du schon benutzen...könnte eventuell ein kleiner vorteil sein ;-)

die id3-tag-geschichte und die theorie mit den verschiedenen versionen war vollkommen richtig. mp3tag ist da eine super lösung.
 
Diese sinnlosen Grundsatzdiskussionen nerven. Bitte im Keim ersticken!!!

Die Jungs haben enige Buttons im Setup wieder verschwinden lassen, z.B. Autogain, HIFI-Resample, ... Ich hatte da in alten Versionen die Hacken drin.
Hab das Gefühl die Funktionen sind trotzdem noch immer aktiv. Gain muss ich nur selten minimal ausgleichen. Das ist auch abhängig von den EQs, da ein fieser Bass auch gerne mal für rote Lichter sorgen kann. Aber wie wir alle wissen sind die guten Lichter grün ;)
 
ich hatte nichts anderes vor als zu ersticken...!
 
Wohooooooo!!!!

Hi everyone,
just letting you all know that we have ITCH 1.1.0 in public beta now.

Schaut mal ins Serato ITCH Forum, das sind wirklich allerhand (!) neue Features!

Sehr geil :D


http://www.serato.com/forum/discussion/156594



Oh, Achtung!

* New Firmware Update
This beta contains a firmware update for the VCI-300 -- however, this firmware update will stop your VCI-300 from working with earlier versions of ITCH. So we would not recommend doing this firmware update unless you have been having problems with using your VCI-300 as a sound card on windows with applications other than ITCH.

Ich machs trotzdem :D
 
Zuletzt bearbeitet:
Important Note
This beta contains a firmware update for the VCI-300 -- however, this firmware update will stop your VCI-300 from working with earlier versions of ITCH. So we would not recommend doing this firmware update unless you have been having problems with using your VCI-300 as a sound card on windows with applications other than ITCH.


Features

* Scaling Waveforms
The Waveforms now scale with pitch to make it easier to see when beats are aligned.

* Key Tag support
Key tags are now read from MP3 files and displayed in the 'key' column in the library.

* Loop Roll
New looping effect where the playhead jumps back to normal time when you release the loop. This is available on the keyboard using ctrl+alt and the '0' - '9' keys. It can also be accessed on the VCI300 by using 'Shift' and the 'Autoloop' button.

* Recording Options
You can now select the file format and bit depth for your recordings in the Playback tab of the setup screen.

* CPU Meter
The CPU Meter below the clock shows the overall CPU usage for your computer.

* Platter Speed Option
In the hardware panel of the setup screen is an option for 33rpm or 45rpm.

* Hi-Fi Resampler Option
This option has been returned to the Playback tab of the setup screen. By default it is on but lower spec computers may run better with this option off.

* Customised Crate View
There is a new 'custom crate columns' option on the library tab of the setup screen. This option will be off by default. When this option is on, crate columns behave as they do in versions before 1.1. When the option is off (default), all crates and playlists share the same column view.

* iTunes Library Changes
- The iTunes library is now collapsible in the crate selector window. Click on the triangle icon next to the iTunes library playlist to expand and collapse the iTunes Library.

- When you uncheck 'read iTunes library' all tracks marked with the iTunes icon are removed from your library unless the track is in an ITCH crate.

- Tracks that are in the iTunes library are now not marked with the iTunes icon if they are already in the ITCH library, but they will still show up in the iTunes playlists as normal. These tracks are also not removed from the ITCH library when you untick 'read iTunes library'.

- You can also drag tracks from an iTunes playlist or the iTunes library onto the "All..." crate to mark it as permanent in the ITCH library. You can also conversely drag a track from an iTunes playlist or the iTunes library onto the 'iTunes Library' playlist to mark it as an iTunes track.


* History Panel
The History function now keeps a comprehensive record of every track played, during every gig. This replaces the old "Review" feature and is a real time saver for professional DJs who need to log their sessions.

- Tracks are only visible in history if they have been 'played'. You can view 'unplayed tracks' by turning on the 'show unplayed tracks' checkbox in the history panel. You can select a track and 'mark played' or 'mark unplayed'.

- You can double click fields in better review to edit them. Double click the session name (it is set to the date of the session by default) to give each session a name.

- You can export sessions from you history to 'txt', 'csv', or 'm3u'. To export, select a session in the history panel, choose an export format and press export. The status bar will indicate where the file has been exported to ("History Export" in your ScratchLIVE folder).

- Recently played tracks are marked green in the history panel and your library, this can be reset by pressing the 'clear' button at the bottom right of the history panel.


Changes & Bug Fixes

* You can now open the 'column chooser' menu by right clicking on a column in the track list.

* Fix so that when using braking (or start acceleration) and keylock at the same time, keylock is disengage while braking or accelerating.

* Fixed autoloop bug where if you set an autoloop and turn it off, then half the autoloop and start it again, it would set the playhead one loop before the loop.

* Overviews rebuild from scratch if they are half done and either autogain or autobpm are not complete to ensure autogain and autobpm are correctly calculated.

* Improved sync for instant doubles.

* Change to make autoloop always set from the current playhead position.

* Fixed bug where disconnecting ITCH hardware would sometimes lead to silence in the offline player on Mac 10.5.

* Fixed selection highlight escaping off the browse screen when scrolling through it with the controller.

* Fixed bug where instant doubling on first then second deck resulted in decks having different tempos.

* Fixed bug where if a track in a crate had its name changed in itunes then on start up ITCH would keep the old song creating a duplicate.


NS7 Specific
* Made decoder ignore NS7 platter spin up when doing an instant double caused a deck to start playing.

* Fixed bug where loop shift while playing in reverse could allow the playhead to escape the loop.

* Fixed loop shift to update the playhead to correct position on both decks when same song is playing on both with the same loop activated.

* Fixed tapping tempo on other deck completly losing the bpm on first deck which is currently waiting for more tap input.

* Improved stability of NS7 reconnecting and changed so that play state (play/paused) remains when disconnecting and reconnecting.

* Changed so the first 5 cue points are always set to the same colors. This improves compatibility with the VCI300 for users using both controllers.

* Fix for bug where on a track load the opposite decks bpm would go missing when repeatedly loading, using tap tempo to tap the bpm and then switching to the other deck.


VCI300 Specific

* New Firmware Update
This beta contains a firmware update for the VCI-300 -- however, this firmware update will stop your VCI-300 from working with earlier versions of ITCH. So we would not recommend doing this firmware update unless you have been having problems with using your VCI-300 as a sound card on windows with applications other than ITCH.

* Fixed VCI-300 connection problems on 10.5.7.

* Fixed bug on Mac where the pitch sliders were not initialising correctly on start up.

* Fixed crate panel flickering when opening and closing the mic/aux panel.
Quell: www.serato.com

Hab mir mal erlaubt das reinzustellen.;)
 
Endlich 33 RPM :)
Da sind die Scratches doch gleich wieder tighter!

Von der Update-Politik kann sich so mancher Mitbewerber eine grosse Scheibe abschneiden. hab noch nie Probleme mit 'ner Beta von Serato gehabt.
 
Da gebe ich dir Recht. Endlich lässt sich die Loop Roll per Controller steuern :D
 
Könnt ihr ganz kurz erklären was loop roll für eine Funktion ist?
 
So wie ich das gelesen habe bringt mir Loop Roll nix.

Du setzt einen Loop aber bei Deaktivieren des Loops spielt der Track nicht nach dem Loop weiter, sondern von der Stelle wo der Track zeitlich angekommen wäre ohne den Loop. Kann man sich also vorstellen als ob der Track wärend eines Loops im Hintergrund (unhörbar) normal weiter läuft.
 
Hab ich das jetz richtig verstanden, dass das Firmware Update nur für Windows user sinnvoll ist und ich mit meinem Mac es nicht brauche? :confused:
 
Ist die Frage mit dem Firmware Update für Apple ernst gemeint?

Check mal die Punkte unter VCI-300 specific ;)
 
So we would not recommend doing this firmware update unless you have been having problems with using your VCI-300 as a sound card on windows with applications other than ITCH.

Vielleicht bin ich zu blöd aber ich versteh das man es nur dann machen soll, wenn man die VCI unter Windows als Soundkarte benutzt in anderen Progs als Itch?!
 
du solltest das firmware update nur mache WENN du probleme hast den vci300 als soundkarte mit anderen programmen zu benutzen.

odeer was meinst du genau?
 

Ähnliche Themen

DJ Str8cut
Antworten
0
Aufrufe
1K
DJ Str8cut
DJ Str8cut
Funkbüro
Antworten
0
Aufrufe
872
Funkbüro
Funkbüro
Funkbüro
Antworten
0
Aufrufe
844
Funkbüro
Funkbüro
Funkbüro
Antworten
0
Aufrufe
1K
Funkbüro
Funkbüro

Neue Themen


Zurück
Oben